from ohmer creek to olsen's log dump

Post links to YouTube, Vimeo, and others of SEVTEC hovercraft in action!
Post Reply
levster
Posts: 139
Joined: February 13th, 2012, 9:40 am
Location: petersburg alaska

from ohmer creek to olsen's log dump

Post by levster » October 30th, 2014, 1:33 pm

this video leaves ohmer creek campground and goes to Olsen's log dump

User avatar
bphillip2
Posts: 418
Joined: February 2nd, 2012, 10:29 pm
Contact:

Re: from ohmer creek to olsen's log dump

Post by bphillip2 » November 1st, 2014, 8:36 am

Was that a protected tree? Great scenery, thank you for posting. Glad to see the old craft found a good home. That was the first craft built in the new shop in Shelton.

flynlow
Posts: 16
Joined: July 23rd, 2013, 4:45 pm

Re: from ohmer creek to olsen's log dump

Post by flynlow » November 3rd, 2014, 3:21 pm

You need to remove the tree magnet from the bow of the craft, manufacturers of hovercraft install these things just for You-tube laughs ! :lol:

levster
Posts: 139
Joined: February 13th, 2012, 9:40 am
Location: petersburg alaska

Re: from ohmer creek to olsen's log dump

Post by levster » November 3rd, 2014, 6:24 pm

the tree magnet doesn't seem to be nearly as strong as the rock magnet.lol

User avatar
jchovernut
Posts: 318
Joined: September 11th, 2011, 8:14 pm
Location: Longwood, FL
Contact:

Re: from ohmer creek to olsen's log dump

Post by jchovernut » January 18th, 2015, 5:30 am

Do you offer tree-trimming service, too?? ;)
John Carter
SEVs: Vanguard, FanTastic, Prospector, Explorer
Others: StarCruiser, UH-18P, RX2000
http://www.hovernut.com

levster
Posts: 139
Joined: February 13th, 2012, 9:40 am
Location: petersburg alaska

Re: from ohmer creek to olsen's log dump

Post by levster » January 31st, 2015, 12:05 pm

it's been said this was the first built out of the shop. it has 9 blades for lift. should I knock it to six? ? ?

User avatar
bphillip2
Posts: 418
Joined: February 2nd, 2012, 10:29 pm
Contact:

Re: from ohmer creek to olsen's log dump

Post by bphillip2 » January 31st, 2015, 5:26 pm

It was the first one we built in the new shop in Shelton.

If you want to try 6, set them at 25°.

Post Reply