Powerfin prop

Please post any other questions or concerns that don't fit into the other topics.
Post Reply
Posts: 16
Joined: July 23rd, 2013, 4:45 pm

Powerfin prop

Post by flynlow » October 14th, 2015, 1:22 pm

IMG_1544.JPG (1.59 MiB) Viewed 1723 times
I have some slight damage to the leading edge of the prop, right at the tip. What is the best method to repair as it only looks to have damaged the surface layers... gelcoat or apoxy resin ? Don't know what hit it, must have tossed something up from the beach.

Cheers Scot

User avatar
Posts: 418
Joined: February 2nd, 2012, 10:29 pm

Re: Powerfin prop

Post by bphillip2 » October 19th, 2015, 7:18 am

Soak it with thin epoxy, then fair out with same mixed with cabo-sil.

Post Reply