lift fans

Post Reply
exskimmer
Posts: 27
Joined: February 26th, 2012, 8:29 am

lift fans

Post by exskimmer »

It seems i have assembled my lift fans with a different pitch on each one what is the proper pitch? Engine is ea82.
highlandhovercraft
Posts: 152
Joined: February 14th, 2012, 3:51 am

Re: lift fans

Post by highlandhovercraft »

I have set mine to 25*

Have you used the locating pins / ballbearings in the fan hub, as that will make it easier to ensure all the blades are at the same angle.
exskimmer
Posts: 27
Joined: February 26th, 2012, 8:29 am

Re: lift fans

Post by exskimmer »

I used the locating pins ,the fan blades were all replaced a few years ago and apperently i assembled one fan with more or less pitch than the other.
User avatar
bphillip2
Posts: 426
Joined: February 2nd, 2012, 10:29 pm
Contact:

Re: lift fans

Post by bphillip2 »

25° is good.
exskimmer
Posts: 27
Joined: February 26th, 2012, 8:29 am

Re: lift fans

Post by exskimmer »

thanks, one fan was set at 25 degrees the other at 30 degrees.
Post Reply